unlock monkey mode

settings

Terms and Conditions of Sale

These Terms and Conditions of Sale (“Terms”) apply to the products, goods, and services (collectively “Services”) provided by ProAsys, Inc. and its subsidiaries, divisions, and affiliates (“ProAsys”) to any Customer (“Customer”). These Terms are incorporated into and are material terms of any agreement, addenda, work order, invoice, purchase order, change order or proposal to which the Terms are attached or referenced and apply to any product or service provided by ProAsys whether provided for a specified period or on a buy as needed, or other basis. Customer’s signature, acceptance of any proposal or quotation, issuance of a purchase order, or acceptance of delivery of any product or service constitutes acceptance of these Terms. These Terms supersede all previous correspondence, proposals, offers, usages, course of dealings and conventions including any implied contracts or commitments. The Service Agreement or other contract between ProAsys and Customer along with these Terms, shall be referred to collectively as the “Agreement.”

1.0

Purpose & Scope. The Purpose of the Services is dependent upon those elected by Customer and agreed to by ProAsys. The Services include and extend to only those systems and locations expressly identified in the Service Agreement and agreed upon between ProAsys and Customer (the “System(s)”) and for the limited purposes identified herein to the exclusion of all other systems, locations, services, and purposes. Any changes to the Systems, services or purposes must be made in writing. Additional work shall be subject to adjustments in corresponding price.

1.1

Traditional Treatment. Unless otherwise specified, the Services provided by ProAsys are intended to promote system efficiency and longevity through the minimization of piping and equipment corrosion, scale formation, system wide microbial fouling and microbial induced corrosion. The sole purpose and scope of minimizing these factors is to aid in preservation of asset value, minimization of energy and water consumption, reduction of maintenance costs and to achieve optimal heat transfer. Unless otherwise specified herein, the Services exclude health-based considerations, including those addressed through an ASHRAE 188 Water Management Program, which ProAsys does not provide. Traditional water treatment Services do not satisfy, and are not intended to satisfy, the requirements of New Jersey S2188 or any other federal, state, or local law requiring a water management program, Legionella testing, or Legionella compliance.

1.2

Potable Water Disinfection. Upon written request, ProAsys will provide Services for the disinfection or chemical cleaning of certain potable water systems, including hyperchlorinations and disinfections of potable systems prior to building occupancy. These Services extend only to those systems and locations expressly identified in the Agreement and agreed to by ProAsys. Customer’s onsite operator is integral to ensuring proper operation. ProAsys is not the licensed operator of Customer’s treatment system. ProAsys’ Services may include: (1) requesting samples to be collected/collecting samples for validation; (2) completing Field Service Reports with findings and recommendations; and (3) reviewing recommendations with Customer’s operator. Customer remains responsible for operation/adjustment of its potable water system, complying with all federal, state and local laws and regulations, securing a licensed operator as required, documenting results following an emergency disinfection, and corrective actions. In the event Customer has no licensed operator to supervise disinfection, it is recommended that Customer consult the local health department for guidance.

1.3

Wastewater/Reclaimed Water. Upon written request, ProAsys will provide Services for the monitoring, testing and/or treatment of wastewater (“Wastewater”) and/or process water to be reused for certain purposes (“Reclaimed Water”). These Services include and extend only to those systems and locations expressly identified in the Agreement (the “Systems”) and for the limited purposes identified herein to the exclusion of all other systems, locations, services, and purposes. Any changes to the scope of work shall be made in writing. Additional work shall be subject to good faith adjustments to the corresponding fees.

1.3.1

Customer Performance Metrics. Customer is responsible for the Wastewater and Reclaimed Water associated with the System(s) identified in the Agreement. The Services are intended to assist Customer in meeting Customer’s Performance Metrics, if possible, for the subject Wastewater and Reclaimed Water. Customer has superior access and knowledge of the operations and history including the existence and nature of any wastewater, pollutants and effluent and the proposed uses for the treated Wastewater and/or Reclaimed Water at the subject location(s) and System(s) identified in the Agreement. Customer also has superior knowledge of all federal, state, and local environmental laws and regulations which may apply to its facilities. Customer also exclusively possesses its compliance and discharge requirements and goals. All performance metrics, goals and requirements relating to the Services covered in this Agreement shall be solely and exclusively determined by Customer. These may include but are not limited to types, limits, levels, parameters and/or concentrations of any chemical, pollutant, waste or effluent specified by Customer to be monitored and/or treated by ProAsys. Customer is solely and exclusively responsible for any claims or causes of action arising from or relating to Customer’s Performance Metrics. Consistent with its limited role, ProAsys shall have no environmental responsibilities or liabilities relating to Wastewater or Reclaimed Water, as provided in Section 10.2.

2.0

Initial Term & Renewal. This Agreement shall extend for a period of one year (unless otherwise specified in Service Agreement) beginning on the date of execution. Unless terminated, the Agreement shall automatically renew for an additional year unless modified or canceled upon sixty (60) days written notice from either party. ProAsys shall notify Customer of any annual rate increase thirty days before the date of automatic renewal. Within 15 days of receiving notice, Customer may terminate without charge or penalty. Otherwise, the Agreement shall renew at the newly proposed rates. These Terms will continue to remain in full force and effect for all renewals. In addition, all Customer acknowledgments including but not limited to the Potable Water Treatment Acknowledgment Form will remain in full force and effect for all Services provided by ProAsys without the need for renewed execution by Customer.

2.1

Termination. Either party to the Agreement may terminate the same at any time by giving notice in writing to the other party, in which case this agreement shall terminate 30 days after the service of written notice at the above referenced address, or other address specified by the parties. Customer will be responsible for payment of all invoices and for products/equipment shipped and services rendered prior to termination. Failure to timely pay will constitute a material breach of the Agreement. In the event of default or delinquency, ProAsys may suspend Services until all payments are received. In the event of termination, or default, all invoices and amounts due through the date of the termination/default must be made current with interest. Upon termination or default, the customer will be responsible for the prorated cost of chemicals used and services performed. Unopened containers/chemicals will be returned to ProAsys at Customer’s own expense. Any chemical provided to Customer becomes the property of Customer once the delivered chemical container is opened, spilled or exceeds its expiration date. If an attorney is needed to assist in debt collection attorney’s fees will be paid by Customer. Any third-party fees or expenses will be billed to the customer.

2.2

Payment Terms. All payments are due within thirty (30) days from the date of ProAsys’ invoices. Customers with unpaid invoices after ninety (90) days will be subject to being placed on credit hold status until payment verification is made. Orders pending may be released at the discretion of ProAsys.

2.3

Price Adjustments. Agreement pricing is based upon current incoming water conditions, equipment operations and the chemical treatment requirements that result. In the event of a change in incoming water conditions or equipment operations that results in an enhanced chemical requirement, pricing is subject to change upon thirty (30) days’ notice. Chemicals necessary to recharge systems experiencing loss of chemically treated water due to system repairs may result in additional charges to Customer based on actual chemical additions required to return the system to the recommended limits. In addition, if the market price for the subject chemicals increases by more than five percent (5%), the pricing hereunder may be increased by ProAsys. A price increase is subject to ProAsys providing to Customer thirty (30) days’ prior written notice of such increase, providing a statement as to the basis for such increase.

2.4

Other Services. ProAsys provides other water treatment related products, services, and equipment, such as passivation (for new or existing towers), layups during non-operating periods, start-ups, glycol sales and testing, hyperchlorinations, disinfections, secondary disinfection, initial facility surveys, customer training and other services. These services are not included in this Agreement but are available upon request. ProAsys does not perform physical cleanings or winterizations.

2.4.1

Training. Upon written request, ProAsys may provide water treatment-related training for Customer’s personnel. ProAsys shall not be liable for any claims, damages or issues arising from or relating to Customer’s failure to request training or Customer’s failure to follow, implement, or execute the training provided.

3.0

System Status. ProAsys will assess the Systems covered by the Agreement prior to the initiation of services. The parties acknowledge that this assessment may provide limited information as the System internals may be obstructed from view and latent defects may be undetectable. Customer will provide ProAsys with accurate and complete information about the subject Systems including but not limited to water flow, identification of all dead legs or other system irregularities that impede complete water flow, unusual issues, past microbiological issues, end point uses, current start up and shut down procedures and other similar items. Customer acknowledges that incomplete, inaccurate, or incorrect information may reduce the effectiveness of the Services. Customer acknowledges and intends that ProAsys relies on the information provided by Customer. ProAsys is not responsible for consequences arising from conditions pre-existing this Agreement or issues arising from incomplete, inaccurate, or incorrect information provided by the Customer or for conditions occurring after the term of this Agreement has expired.

4.0

Site Specific Considerations. Building water systems are dynamic and any control recommendations provided by ProAsys may vary from those provided by an equipment manufacturer or contractor as site specific considerations and operating conditions may require. Systems are dynamic and temporary or occasional readings outside of control ranges may occur. Operation within control ranges does not mitigate all risks. ProAsys will provide periodic supervisory on-site service visits at the frequency deemed appropriate by its service representatives and as dictated by site specific considerations. ProAsys will provide electronic service reports after each visit or at the frequency deemed appropriate by its service representatives based on the service provided and as dictated by site specific considerations.

5.0

Customer’s Obligations. Customer is responsible for the Systems and attendant equipment. The success of the Services depends upon and requires Customer’s cooperation and commitment. Customer makes the following representations and warranties: (1) the Systems are in good condition with adequate water flow, velocity and working chemical feed and controls for treatment to be effective; (2) Customer, at its expense, shall maintain and operate the Systems in a safe and prudent manner, including routine maintenance, cleaning and repair as recommended by the equipment manufacturer, mechanical contractor or ProAsys; (3) Customer shall provide ProAsys reasonable access to the Systems as needed for the Services; (4) Customer shall read and comply with the recommendations provided by ProAsys in service reports or otherwise; (5) Customer shall notify ProAsys of any changes or disruptions in the Systems that may impact the Services; and (6) Customer shall repair leaks as they occur. To the extent Customer’s Systems are not operated continuously, Customer is responsible for proper shutdown, lay-up, winterizing, cleaning, flushing, passivation, and start-up consistent with the manufacturer’s guidelines. ProAsys will not be liable for any damages or conditions arising from any of the foregoing Customer Obligations.

5.1

Recommendations. ProAsys is not responsible for damages relating to Customer’s failure to properly clean, operate or maintain the systems or attendant equipment. Customer acknowledges that failure to follow ProAsys’ recommendations may reduce the effectiveness of the Services provided. ProAsys makes no representation or warranty regarding its Services in the event ProAsys’ recommendations are not followed. ProAsys shall be held harmless for any damages or claims arising from or relating in any manner to the failure to follow ProAsys’ recommendations.

5.2

Return of Products/Equipment. Unless purchased by Customer, products and equipment delivered/installed at Customer’s facility, including equipment leased to Customer or included in the Agreement pricing, are the property of ProAsys. Customer will be responsible for any liability arising from the use and possession of said equipment and will maintain any such equipment and protect from any damage. Upon termination, Customer shall, at its own expense, return all ProAsys equipment and remaining unused products and chemical inventory to ProAsys within 15 days following termination of this Agreement. Equipment purchased by Customer is Customer’s property and need not be returned. If the Agreement is terminated before the end of the Initial Term, Customer shall pay ProAsys the unamortized cost of any equipment and installation provided by ProAsys under the Agreement. Open or used products/chemical inventory may not be returned and will be invoiced at the applicable rate in effect at the time of termination. In the event any ProAsys equipment becomes lost, stolen, damaged, seized or condemned, Customer agrees, at ProAsys’ election, to pay ProAsys for the book value of the equipment, cost of repairs (if feasible) or the total costs of new equipment including installation costs. All equipment warranties are solely from the manufacturer.

6.0

Legionella Testing. Upon express written request, Customer may engage ProAsys to provide Legionella testing related services, including testing for other waterborne pathogens where expressly agreed. In those instances, ProAsys will: (1) obtain the agreed upon number of environmental samples from the Systems in accordance with the methods prescribed by an approved testing laboratory (including potable water, non-potable water and/or swab samples as appropriate); (2) store and transport those samples to any approved testing laboratory selected by ProAsys to perform the necessary testing for each environmental sample; and (3) provide the reported results to Customer. In reporting or transmitting the test results contemplated by this Agreement, ProAsys does not warrant that the reported levels of Legionella pneumophila or any other waterborne pathogen within any given environmental sample are safe or that they are reflective of the levels within the Customer’s water System(s) at any location or time other than the moment and location at which the sample was obtained. Customer is responsible for implementing the appropriate response to any test results including instances of Legionella positivity. ProAsys shall not be liable for any claims or causes of action arising from the method, sampling location, means or manner of testing contemplated by this Agreement including the method of sampling prescribed or the sampling locations. Customer acknowledges that the frequency at which samples are to be taken is subject to change and agrees to pay all corresponding costs. Customer shall identify the specific sampling locations at which ProAsys is to obtain samples from Customer’s System(s) before any sampling begins. Customer shall provide ProAsys with reasonable access to its premises and the Customer-identified sampling locations to allow ProAsys employees to perform the sample collection. Customer shall assist in removing all fixtures and equipment as necessary to allow sampling prior to ProAsys’ scheduled arrival and/or per ProAsys’ instructions.

6.1

Legionella Positivity. Customer is responsible for implementing the appropriate response to instances of Legionella positivity, including any remediation and retesting, which are separately billable unless expressly included in the Agreement.

6.2

Confidentiality. ProAsys will not report or disclose any measurement, data or information relating to Services provided at Customer location(s) to any other person or entity without the express written consent of Customer, except as required by law, subpoena, court order, or governmental directive. Customer agrees that it retains the sole and exclusive responsibility to timely report and disclose any information relating to Customer location(s) to the appropriate environmental agency or public health official as required by federal, state, or local law, including the Legionella Compliance Laws.

6.3

Emergency Response. In the event of a water management-related emergency, such as certain Legionella positivity, a major water disruption, or a Legionella infection associated with the facility, ProAsys can respond on-site to assist within 48 hours of request. ProAsys will make recommendations to help minimize risks, to disinfect the positive water system, and to comply with local, State, and Federal public health regulations or directives. Any communications with legal counsel should be directed to legal counsel for ProAsys. Emergency response will be separately billed and paid by Customer. Additional rates and fees will apply when responding to customer requests for consultation in any of the customer’s legal claims and proceedings. All legal fees and expenses incurred by ProAsys while assisting or supporting Customer in response to a claim, investigation or lawsuit including but not limited to witness interviews, depositions or subpoenas shall be paid by Customer.

6.4

Legionella Science. Scientific evidence is either lacking or inconclusive in certain aspects of Legionella. The safe level for Legionella bacteria is unknown and the scientific consensus is that complete prevention of Legionella bacteria is neither realistic nor practical. ASHRAE Standard 188 remains under continuous maintenance. While certain measures may assist in the minimization of risk, no water treatment related service can be represented to completely prevent or control Legionella to a safe level, control all risk factors for infection or prevent human illness. ProAsys disclaims any liabilities relating to waterborne pathogens or any related health risks.

6.5

Waterborne Pathogens and Contaminants. Waterborne pathogens and contaminants, including Legionella, Pseudomonas, E. coli, lead, copper, iron, and other biological, chemical, or environmental constituents, present inherent risks in Customer’s water-based Systems, and safe levels may be unknown, disputed, regulatory-context dependent, or impossible to guarantee continuously. Regulatory thresholds and action levels are compliance standards only, and any test result reflects only the location and moment of sampling. No Service, including water treatment, testing, disinfection, potable water, secondary disinfection, ST108-related, remedial, or response service, can be represented or warranted to prevent, control, eliminate, continuously detect, or prevent recurrence of such pathogens or contaminants, guarantee a non-detect result, potability, safety, or regulatory compliance, control all risk factors, or prevent disease, injury, or other claimed damages. ProAsys disclaims all liability and warranties relating to waterborne pathogens, waterborne contaminants, and related health risks, and Customer releases, waives, and discharges ProAsys and any third-party support vendor from all claims or issues arising from or relating to them in connection with the Services.

7.0

Potable Water Treatment Acknowledgment. Customer acknowledges known limitations with respect to potable water disinfections. While these measures may assist in risk minimization, no disinfection measure can guarantee the complete elimination or prevention of waterborne pathogens, a non-detect, or the subsequent return of those pathogens. Even well treated systems can contain waterborne pathogens. Some systems may require multiple disinfections. Customer agrees that ProAsys cannot have complete knowledge of the internal condition of the entire System or its history. Customer remains solely responsible for the operation of its potable water system(s). Customer remains solely responsible for compliance with all laws, regulations, codes, and authorities that may apply to Customer’s facility and system(s) including but not limited to the Safe Drinking Water Act. Certain states or local agencies may require a licensed operator or pesticide application for supplemental or secondary treatment of potable water. In those locations, ProAsys may provide equipment and chemicals but the treatment will be administered by an appropriately licensed operator.

7.1

Sanipur. Potable cleaning and disinfection Services may use and employ the Sanipur Monochloramine System (“SMS”), including Sanikill monochloramine generators, a supplemental disinfection system for minimizing the risk of Legionellosis and certain other waterborne pathogens in building water systems. Sanipur is a patented and proprietary technology for which all intellectual property is exclusively owned by Sanipur International, LLC, Sanipur SRL and/or Sanipur US, LLC (collectively “Sanipur”). All technical information, data specifications, documents, know-how and models relating to the SMS are proprietary to Sanipur which holds an exclusive license to the same. Sanipur has granted certain limited rights and license to market and distribute SMS to ProAsys. Customer acknowledges that all representations, guarantees and warranties including but not limited to those contained in the proposals or quotations issued to Customer regarding the nature, purpose, quality and capabilities of SMS and related technology are known to and made exclusively by Sanipur. Customer agrees that its exclusive remedy arising from any issue with the SMS or any such representations, guarantees or warranties is with Sanipur.

8.0

Water for Processing of Medical Devices. Customer and appropriate medical, infection control, sterilization, medical device, clinical engineering, and procedure areas personnel (collectively “Medical Personnel”) have the sole, ultimate and exclusive responsibility to determine the suitability of use of medical devices on a patient. Accordingly, Medical Personnel have the sole, ultimate and exclusive responsibility for the selection, maintenance, monitoring and validation of effective water quality suitable for the processing of medical devices (via cleaning, rinsing, disinfection, sterilization or otherwise) pursuant to the guidance provided in ANSI/AAMI ST108:2023. Medical Personnel shall establish all water quality and steam purity specifications and requirements. Upon written request, ProAsys may assist in providing sampling, testing, and chemical water treatment to assist Medical Personnel in achieving their chosen parameters.

8.1

Liability Limits (Water for Medical Devices). There are inherent risks and challenges relating to the processing of medical devices prior to use including the increasing complexity of modern medical devices with hidden, difficult to access areas (e.g., lumens and complex mechanisms) where clinical soil can become lodged and the emerging and reemerging incidence of “superbugs” that must be removed or inactivated for patient safety but are able to survive processing in situations where soil removal is incomplete. In addition, gram negative bacteria and nontuberculous mycobacteria can grow in water regardless of treatment process. As monthly water treater and non-medical personnel, ProAsys is not responsible for and shall be held harmless for any damages or consequences arising from water for the processing of medical devices including but not limited to device malfunctions during a patient procedure, toxic effects, or irritation from residuals on a device or implant, risk of infection, reactions due to endotoxins, or ineffective cleaning/disinfection.

9.0

Limited Role. ProAsys does not write, develop, prepare, implement, administer, maintain, or renew Water Management Programs (“WMP”). Upon written request, ProAsys’ role shall be limited to the initial Facility Survey described in Section 9.1. ProAsys will not serve as a member of the WMP team or otherwise be responsible for WMP development, administration, implementation, or renewal and accordingly, is not responsible for damages arising from or conditions relating to these roles or tasks. Customer is responsible for retaining a qualified third party to prepare and administer any WMP. Testing and other Services do not constitute a WMP. ProAsys may provide ancillary services such as Legionella testing, hyperchlorinations, and disinfections upon written request. These services are not included in the Survey and are available pursuant to a separate proposal or agreement.

9.1

Facility Survey. Upon written request, and with Customer support and assistance, ProAsys will conduct and document an initial site survey of the System(s) to identify points of concern (“Survey”) for use by Customer and its third-party WMP provider. Customer will provide accurate and complete information about its systems including but not limited to schematics and any conditions that may impede complete water flow, unusual system issues, past microbiological issues, end point uses, current start-up and shut down procedures and related items requested by ProAsys. Incomplete or inaccurate information may reduce WMP effectiveness. ProAsys did not participate in the design of the system or any subsequent changes thereto, and ProAsys shall have no responsibility or liability arising from system design or relating to inaccessible or obstructed portions of the system or changes to the original system design which are not apparent. ProAsys is not responsible for damages arising from conditions pre-existing the Survey, issues arising from incomplete or inaccurate information or for events occurring after the term of this Agreement has expired.

9.2

WMP Related Liabilities. Implementation of and adherence to a WMP is ultimately the responsibility of Customer, as the owner/operator of the facility. While WMPs may assist in the minimization of risk, no plan can be represented to completely prevent or control Legionella to a safe level, control all risk factors for infection or prevent human illness. ProAsys disclaims any liabilities relating to waterborne pathogens or any related health risks. ProAsys is not responsible for the acts or omissions of Customer’s WMP provider or other professionals. Customer releases ProAsys and any WMP third-party support vendor from any and all liability in connection with any Survey or WMP related Services. Customer and ProAsys further agree that the risks between them have been allocated such that ProAsys’ total liability, if any, shall not in any event exceed a maximum of the amount received by ProAsys as compensation for the Survey under this Agreement.

9.3

New Jersey S2188. Under New Jersey S2188 (together with any other federal, state, or local law requiring a water management program, Legionella testing, or Legionella compliance, the “Legionella Compliance Laws”), owners and operators of covered buildings and facilities have water management program, recordkeeping, notice, testing, and reporting obligations. Customer is solely responsible for determining whether S2188 applies to the Facility or System(s), confirming the applicable statutory deadlines, and satisfying all compliance obligations under the Legionella Compliance Laws.

9.4

Legionella Compliance Laws. ProAsys’ role under the Legionella Compliance Laws is limited to performing the Services expressly identified in the applicable proposal, Schedule, addendum, work order, purchase order, change order, or other written agreement accepted by ProAsys. ProAsys may, if expressly engaged, perform the initial facility survey, sampling, testing coordination, service reports, recommendations, training, or remedial support. ProAsys does not assume Customer’s owner/operator obligations under the Legionella Compliance Laws and does not act as Customer’s legal counsel, engineer of record, public health official, regulatory consultant, or compliance officer. No Legionella-related service, statement, recommendation, report, template, proposal, or communication by ProAsys constitutes a legal opinion, legal advice, regulatory certification, or guarantee of compliance with the Legionella Compliance Laws or any other law.

9.5

Regulatory Changes. The Legionella Compliance Laws require the applicable state and local agencies, including New Jersey’s Department of Environmental Protection and Department of Health, to adopt or maintain implementing rules, regulations, and guidance (for S2188, within 24 months of enactment, S2188, §§ 4, 8). That regulatory guidance, once issued, will inform the scope, content, and enforcement of water management programs required under the Legionella Compliance Laws, including the procedures, forms, templates, recordkeeping requirements, enforcement positions, and testing standards applicable to covered buildings and facilities. Customer acknowledges that the Legionella Compliance Laws, related agency guidance, forms, templates, enforcement positions, and regulatory expectations may change or be interpreted differently by governmental authorities after the date of this Agreement. Unless expressly included in the agreed Services, ProAsys is not responsible for preparing, revising, certifying, submitting, or maintaining any governmental forms, reports, notices, dashboards, postings, certifications, or records required under the Legionella Compliance Laws or any implementing regulations or guidance. Any additional work required because of new or changed laws, regulations, guidance, agency requests, inspections, investigations, enforcement positions, or Customer conditions is additional work subject to corresponding price adjustments. ProAsys shall not be liable for any damages, citations, fines, penalties, administrative assessments, enforcement actions, corrective actions, remediation obligations, or other costs or liabilities arising from or relating to the Legionella Compliance Laws, any implementing regulations or guidance, changes to any of the foregoing, or Customer’s failure to comply with any of the foregoing.

10.0

Limitations of Liability. Customer and ProAsys further agree that the risks between them have been allocated such that ProAsys’ total liability, if any, shall not in any event exceed a maximum of the annual amount received by ProAsys as compensation for the Services under this Agreement. ProAsys shall be held harmless for any damages or claims arising from in any manner to Customer’s failure to comply with Customer Obligations or otherwise failure to abide the terms of this Agreement. Sections 6.4 and 6.5 apply to Legionella and other waterborne pathogens. Neither ProAsys nor its employees and subcontractors are employees of customer but shall be an independent contractor with respect to work performed pursuant to this agreement.

10.1

Warranties. ALL SERVICES ARE PROVIDED ON AN “AS IS” BASIS. PROASYS MAKES NO ADDITIONAL WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO OR IN ANY WAY RELATING TO THE SERVICES PROVIDED, WHETHER BASED ON BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Upon inspection and instructions by the Customer, defective materials may be returned to ProAsys. If found to be defective such goods will be replaced or repaired. ProAsys shall not be liable for breach of warranty for any loss or damage arising from the use of such materials. The exclusive remedy against ProAsys for breach of warranty shall be that of replacement of defective materials.

10.2

Environmental Liabilities. Consistent with its limited role in the provision of the Services including but not limited to those related to Wastewater and Reclaimed Water, ProAsys is not an owner, operator, generator, arranger, disposer, transporter, or potentially responsible party as those terms are known or defined under federal, state, or local laws. ProAsys shall neither have nor incur any federal, state, or local environmental liabilities for services relating to this Agreement including but not limited to any fines, penalties, costs or other liabilities under the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), the Clean Water Act (CWA), the Resource Conservation and Recovery Act (RCRA) or others. Customer remains solely and exclusively responsible for securing any environmental permits or licenses required by federal, state, or local law. Customer hereby agrees, warrants, releases, acquits, and forever discharges ProAsys from any and all claims, demands, causes of actions, claims for contribution and indemnity, which could be asserted now or in the future that relate or in any way arise out of environmental liabilities relating to this Agreement. Customer agrees to indemnify, defend and hold harmless ProAsys for any claims arising from or relating to environmental liabilities.

10.3

Indemnification. CUSTOMER WILL DEFEND, INDEMNIFY, AND HOLD HARMLESS PROASYS, ITS OFFICERS, DIRECTORS, EMPLOYEES, MANAGERS, AND THEIR SUCCESSORS AGAINST ALL ACTIONS, SUITS, CLAIMS, LOSSES, LIABILITIES AND DEMANDS WHATSOEVER, INCLUDING COSTS, EXPENSES, AND ATTORNEYS’ FEES, ARISING FROM OR RELATING TO THE SERVICES PROVIDED BY PROASYS OR THE LEGIONELLA COMPLIANCE LAWS, INCLUDING BUT NOT LIMITED TO CLAIMS BASED ON NEGLIGENCE. Notwithstanding the foregoing, ProAsys will defend, indemnify, and hold harmless Customer from third-party claims to the extent caused by ProAsys’ gross negligence or willful misconduct, subject to the limitations of liability in Section 10.0, and Customer’s obligations under this Section shall not apply to that extent. These protections will survive expiration or termination of the Agreement. ProAsys will promptly notify Customer of any claim asserted against it for which such indemnification is sought. ProAsys shall not be liable for any fines or civil penalties arising from or relating to the Customer’s location(s), System(s) or the owner/operator’s failure to comply with any regulations, including the Legionella Compliance Laws.

10.4

Force Majeure. Except with respect to Customer’s obligation to pay invoices when due, if ProAsys is prevented, delayed, suspended, or otherwise impacted in performing the Services by a force majeure event, it shall not be liable or responsible for its failure to timely perform but shall perform as soon as possible after the force majeure event ceases. References to force majeure shall refer to circumstances that are beyond a party’s control and that affect production or transportation, including acts of God, pandemics, epidemics, acts of war, acts of government, terrorism, riots, labor strikes, labor lockouts, interruption in telecommunication transmission or product transportation, materials or supply chain shortages or delays or sudden severe increases in materials prices or other costs due to tariffs, trade wars or otherwise, accident, fire, water damage, flood, earthquake, windstorm, other natural disasters and catastrophes, and compliance by a party with any order, action, direction or request of any governmental officer, department, agency, authority, or committee thereof. This provision is intended to be interpreted to expand rather than limit the application of the Uniform Commercial Code (“UCC”).

10.5

Equitable Adjustments. If ProAsys is delayed, disrupted, suspended, or otherwise impacted at any time in the commencement, cost of, or progress of the Services by any issues beyond its control including but not limited to: (1) governmental, regulatory actions, and/or orders arising out of or relating thereto; (2) disruptions to material and/or equipment supply chains, including increased costs; (3) delayed inspections or permit approvals, (4) government quarantines, shelter-in-place orders, evacuations, closures, or other mandates, restrictions, and/or directives, including those relating to social distancing; (5) Customer restrictions and/or directives; (6) fulfillment of ProAsys’ contractual or legal health and safety obligations, including personal protective equipment, and/or (7) tariffs, trade wars, or other governmental action, then ProAsys shall be entitled to an equitable adjustment, determined by ProAsys, to both the time and manner of performance and the price to account for any such delays, disruptions, suspensions, impacts or cost increases.

10.6

Assignment. The Agreement cannot be assigned by either party without prior written consent, except to a parent or subsidiary or a subsidiary of its parent, or to a successor by merger, consolidation or purchase of substantially all the assets of at least that portion of the assigning party’s business related specifically to this agreement.

10.7

Disputes. This Agreement and any dispute arising from or relating to the Services provided by ProAsys shall be governed by the laws of Pennsylvania. In the event of a dispute relating to the Services or Agreement, the parties agree to attempt to resolve the dispute through good faith negotiation within forty-five (45) days of receipt of notice of an issue. If the dispute is not resolved through negotiation, the parties agree to mediate with a mutually agreeable third party prior to initiating a lawsuit. Each party agrees that the courts of Pennsylvania shall have personal jurisdiction over the parties and subject matter jurisdiction over any issue or dispute arising out of or related to the Services, and that venue shall be proper in Berks County, Pennsylvania.